2.2 The Illustra 400 Fixed IP Indoor Mini-Dome (PoE)
Figure 2.3 Fixed IP indoor mini-dome
1 2
1.
Plug Inlet: A DC 12V inlet that connects to an external power supply.
2.
Plug Inlet: An AC 24V inlet that connects to an external power supply.
3.
ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps
Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the
same cable as used for the network connection.
4.
AUDIO IN: The connector is used to connect the audio output from other devices to the
camera.
VIDEO OUT Connector: The connector provides the unit's composite video signals to a
5.
monitor. (This connector adjusts and improves the images.)
AUDIO OUT: Provides the camera's audio signal to a speaker or stereo.
6.
7.
GPIO: This is a 6-PIN connector including the ALARM IN/OUT, RS-485, DC OUTPUT and
GROUND items for connecting with external devices.
8.
USB port: The user can use a USB device cable to connect the IP camera to the USB port on
the PC.
9.
SD/ SDHC CARD slot: This is used for updating system software and archiving / accessing
critical images.
10. RESET: Recover to factory default. (Refer to section 2.5 The Reset Button.)
20
3
4 5 6
7
Installation and Operation Guide
8
9
10