Table of Contents
Advertisement
Various File
Switch Ways
Multi-channel
Playback
Window Zoom Switch between self-adaptive screen/full screen when playback
Partial
Enlargement
Backup
function
Backup Mode
Network
Function
Network
control
Motion
Motion
Detection
Detection and
Alarm
Video Loss
External Alarm
Manual Alarm
Control
Alarm Input
Alarm Output
Alarm Relay
USB Interface
Interface
Network
connection
RS485
RS232
System
Hard Disk
Information
Information
© Copyright Qvis® All documentation rights reserved.
Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel
There is 1/4/9/16-channel playback mode.
(It may vary due to different series.)
When in one-window full-screen playback mode, you can select any
zone to activate partial enlargement function.
HDD backup
Support peripheral USB backup device. (Flash disk, portable disk,
USB burner and etc.)
Support peripheral eSATA backup device.
Support network download and save
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as external alarm, motion detection and
video loss via client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output
Bidirectional audio.
Zone setup: support 396/330((PAL 22×18, NTSC 22×15)) detection
zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message
prompt.
Alarm can activate external alarm or screen message prompt.
Support record activation function or activate external alarm or screen
message in specified period.
Enable or disable alarm input channel
Support analog alarm signal to specific alarm output channel.
8-ch alarm input（You
can set normal open
or normal close type
to select the alarm
type. ）
6-channel relay
output, including one
controllable DC +12V
output port.
2A，125V AC 1A（activation alarm ）
30V DC
3 USB 2.0 ports.
RJ45 10M/100M/1000M self-adaptable Ethernet port
PTZ control port
Support various PTZ control protocols.
Ordinary COM (Debug),keyboard connection and transparent serial
port(COM input and output via network )
Display HDD current status
16-ch alarm input
（You can set normal
open or normal close
type to select the
alarm type. ）
6-channel relay
output, including one
controllable DC +12V
output port.
16-ch alarm input
（You can set
normal open or
normal close type to
select the alarm
type. ）
5-channel relay
output，including
one controllable DC
+12V output port.
11
Advertisement
Table of Contents
