Table of Contents
Advertisement
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN
from the IP address column.
Note: you need to use previous IP address in the LAN to login the device. Please go to the IP
address item to via the device current device information. You can access the client-end via this
new address.
DDNS
The DDNS interface is shown as in Figure 7-31.
The DDNS is to set to connect the various servers so that you can access the system via the
server. Please go to the corresponding service website to apply a domain name and then access
the system via the domain. It works even your IP address has changed.
Please select DDNS from the dropdown list (Multiple choices). Before you use this function,
please make sure your purchased device support current function.
© Copyright Qvis® All documentation rights reserved.
Figure 7-30
Figure 7-31
160
Advertisement
Table of Contents
