Qvis IAPOLLO HDRT HD User Manual page 174

SNMP
The SNMP interface is shown as in Figure 7-35.
The SNMP allows the communication between the network management work station software
and the proxy of the managed device.
Please refer to the following sheet for detailed information:
Parameter
SNMP Port
Read Community
Write Community
Trap address
© Copyright Qvis® All documentation rights reserved.
Figure 7-35
Function
The listening port of the proxy program of the device. It is a
UDP port not a TCP port. The value ranges from 1 to 65535.
The default value is 161
It is a string. It is a command between the manage process
and the proxy process. It defined the authentication, access
control and the management relationship between one proxy
and one group of the managers. Please make sure the device
and the proxy are the same.
The read community will read all the objects the SNMP
supported in the specified name. The default setup is public.
It is a string. It is a command between the manage process
and the proxy process. It defined the authentication, access
control and the management relationship between one proxy
and one group of the managers. Please make sure the device
and the proxy are the same.
The read community will read/write/access all the objects the
SNMP supported in the specified name. The default setup is
write.
The destination address of the Trap information from the
proxy program of the device.
165