Qvis IAPOLLO HDRT HD User Manual page 172

Email
The email interface is shown as in Figure 7-33.
Please refer to the following sheet for detailed information:
Parameter
Enable
SMTP Server
Port
Anonymity
User Name
Password
Sender
Authentication
(Encryption
mode)
Subject
Attachment
Receiver
Interval
© Copyright Qvis® All documentation rights reserved.
Figure 7-33
Function
Please check the box here to enable email function.
Input server address and then enable this function.
Default value is 25. You can modify it if necessary.
For the server supports the anonymity function. You can auto
login anonymously. You do not need to input the user name.
password and the sender information.
The user name of the sender email account.
The password of sender email account.
Sender email address.
You can select SSL or none.
Input email subject here.
System can send out the email of the snapshot picture once
you check the box here.
Input receiver email address here. Max three addresses.
It supports SSL,TLS email box.
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
163