Qvis IAPOLLO HDRT HD User Manual page 127


About user account and MAC. When you add a new user, you can input the MAC address of
current user. Only the user of the same MAC address can access the device remotely.(MAC
address is for the device of the same LAN.) If you leave MAC address item in blank when
you add a new user, the user of any MAC address can access the device remotely. You can
set or change MAC address when you add or modify a user. The MAC address function is
also valid for PSS login. Please note current function does not support IPV6.
After all the setups please click save button, system goes back to the previous menu.
Modify Password
Click password button, the interface is shown as in Figure 5-55. Here you can modify account
password.
Please select the account from the dropdown list, input the old password and then input the new
password twice. Click the Save button to confirm current modification.
For the users of user account right, it can modify password of other users.
© Copyright Qvis® All documentation rights reserved.
Figure 5-54
118