13
Rotate, and then remove the 2nd pickup bushing.
14
Pull out the shaft, and remove the ACM.
Pick/lift motor gearbox removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
302.
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Remove the ACM assembly. See
7
Position the printer so that it sits on its left side.
"Left cover removal" on page
"Rear exit door removal" on page 301
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
"ACM assembly removal" on page
Repair information
209.
and
272.
274.
288.
297
"Rear cover removal" on page
273.
7015