Pick/Lift Motor Gearbox Removal - Lexmark MS510 Series Service Manual

Pick/Lift motor gearbox removal

1
Remove the left cover. See
2
Remove the rear door and cover. See
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Remove the ACM assembly. See
7
Position the printer so that it sits on its left side.
8
Remove the three screws (A).
9
Disconnect the cable from the pick/lift motor gearbox.
"Left cover removal" on page
"Rear door and cover removal" on page
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
"ACM assembly removal" on page
Repair information
166.
223.
226.
233.
A
239
4514-630, -635, -636
240.
225.