ACM assembly (MX310, MX410) removal
1
Remove the left cover. See
2
Remove the main drive gearbox. See
3
Remove the rear door and cover. See
302.
4
Remove the power supply. See
5
Remove the power supply shield. See
6
Remove the duplex. See
7
Remove the ACM clutch. See
Warning—Potential Damage: Do not cut the cable (leave the ACM clutch hanging).
8
Remove the screw (A) and then detach the trailing edge sensor.
"Left cover removal" on page
"Main drive gearbox removal" on page
"Rear exit door removal" on page 301
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
"ACM clutch removal (MX310, MX410)" on page
Repair information
209.
and
272.
274.
A
294
211.
"Rear cover removal" on page
273.
219.
7015