h
Route the cable using the new path, and secure it with a cable tie (A).
ACM assembly removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
302.
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Position the printer so that it sits on its left side.
7
Remove the retainer spring (A).
8
Remove the spring (B).
"Left cover removal" on page
"Rear exit door removal" on page 301
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
Repair information
209.
and
272.
274.
288
A
"Rear cover removal" on page
273.
7015