Table of Contents
Advertisement
Remove the system board:
1.
Unsolder the battery cables from the system board in the following sequence:
(1) Black battery cable
(2) White battery cable
(3) Red battery cable
2.
Disconnect the rear-facing webcam cable (1) from the system board.
3.
Disconnect the front-facing webcam cable (2) from the system board.
4.
Unsolder the microphone cables (3) from the contact points on the system board.
5.
Unsolder the GPS antenna cable (4) from the contact point on the system board.
System board
33
Hide quick links:
Advertisement
Table of Contents
