Gps Antenna - HP 10 Plus 2201 User Manual

4. Detach the Wifi antenna transceiver (3) from the display panel assembly. (The Wifi antenna
transceiver is attached to the display panel assembly with double-sided adhesive.)
5.
Remove the Wifi antenna cable and transceiver.
Reverse this procedure to install the Wifi antenna.

GPS antenna

NOTE:
The GPS antenna is included in the Antenna Kit, spare part number 784327-001.
Before removing the GPS antenna, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 15).
GPS antenna
21