Removal And Replacement Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP 10 Plus 2201 User Manual

Hp 10 plus 2201 tablet and hp 10 2101 tablet
Table of Contents

Advertisement

4
Removal and replacement
preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
Flat-bladed screw driver
Magnetic screw driver
Phillips P0 screw driver
Phillips P00 screw driver

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the tablet, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.

Cables and connectors

CAUTION:
the reassembly process. Improper cable placement can damage the tablet.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with
extreme care; these cables tear easily.
10
Chapter 4 Removal and replacement preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts.
When servicing the tablet, be sure that cables are placed in their proper locations during

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

10 2101

Table of Contents