Reverse this procedure to install the battery.
Speakers
Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Remove the speakers:
1.
Unsolder the battery cables from the system board in the following sequence:
(1) Black battery cable
(2) White battery cable
(3) Red battery cable
2.
Unsolder the left speaker cables (1) from the contact points on the system board.
18
Chapter 5 Removal and replacement procedures
Back cover on page
15).
Spare part number
784328-001