Battery - HP 10 Plus 2201 User Manual

3. Swing the back cover (2) up and back until it completely separates from
the display panel assembly.
4. Remove the back cover (3).
Reverse this procedure to install the back cover.

Battery

Description
Battery, 2-cell, 7700-mAh, USB-charging (includes cable and double-sided adhesive)
Before removing the battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
information. To prevent loss of information, save your work or shut down the tablet through
the operating system before removing the battery.
16 Chapter 5 Removal and replacement procedures
Back cover on page
To reduce potential safety issues, use only the battery provided with the tablet, a
Removing a battery that is the sole power source for the tablet can cause loss of
15).
Spare part number
784326-001