(Group 1) - ABB FENA-01 User Manual

FENA-01/-11/-21 configuration parameters – group A (group 1)
Note: The actual parameter group number depends on the drive
type. Group A (group 1) corresponds to:
•
parameter group 51 in ACS355, ACSM1, ACS850 and
ACQ810
•
parameter group 51 in ACS880 and ACS580 if the adapter is
installed as fieldbus adapter A or group 54 if the adapter is
installed as fieldbus adapter B.
No. Name/Value
01 FBA TYPE
02 PROTOCOL/
PROFILE
ACS355:
FB PAR 2
ACSM1:
FBA PAR2
ACS850/ACQ810:
FBA par2
ACS880/ACS580:
Protocol/Profile
100 = EIP AC/DC
101 = EIP ABB Pro
102 = EIP T16
103 = EIP T32
Description
Read-only. Shows the fieldbus adapter type as
detected by the drive. The value cannot be
adjusted by the user.
If the value is 0 = None, the communication
between the drive and the module has not been
established.
Selects the application protocol and
communication profile for the network
connection.
The selections available for EtherNet/IP
communication are listed below.
1)
0 = Modbus/TCP: ABB Drives profile -
Classic
EtherNet/IP protocol: ODVA AC/DC drive
profile
EtherNet/IP protocol: ABB Drives profile
EtherNet/IP protocol: Transparent 16-bit profile
EtherNet/IP protocol: Transparent 32-bit profile
EtherNet/IP – Start-up 117
Default
128 =
ETHER-
NET
1)
0