Fpba-01 Configuration Parameters – Group C; Data In 1; 2 To 12 Data In 2 To Data In 12 - ABB FPBA-01 User Manual

48
Table 3. FPBA-01 configuration parameters – Group C
Par. Parameter name
no.
1

DATA IN 1

(drive to master)
2 DATA IN 2*
3 DATA IN 3
4 DATA IN 4
5 DATA IN 5
6 DATA IN 6
7 DATA IN 7
8 DATA IN 8
9 DATA IN 9
10 DATA IN 10
11 DATA IN 11
12 DATA IN 12
*Default setting if the Transparent 32 profile is used.
**Fixed setting with an ACS350 drive.
***Supported only with an ACSM1/ACS850 drive.
1 DATA IN 1
This parameter represents data word 1 sent by the drive over the
PROFIBUS network. For the contents, see configuration
parameter group B, parameter 1 (DATA OUT 1) on page 45.

2 to 12 DATA IN 2 to DATA IN 12

See parameter 1 above.
Drive configuration
Alternative settings
0 to 9999
Format: xxyy, where
xx = parameter group and
yy = parameter index.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
See DATA IN 1 above.
Default
setting
4 (Status word)
or
14 (Status word
32-bit)*
0 or 5 (ACT1)**
0
0
0
0
0
0
0
0
0
0