Print Button Description - Microcom 224 Operator's Manual

Getting Started
Front Panel
and LED
(Status Light)
Figure 3-5
3.4.1 Print Button
Operation
Printing a label
Pause printing
Feeding labels
(Line feed)
3-6
Print Button and Status Indicator Light
Press the Print Button while the printer is IDLE or PAUSED to
reprint the last label.
A power up label will print after a power ON cycle when the Print
Button is pressed.
Press the Print Button briefly while the printer is printing to enter
the PAUSED mode.
Press the Print Button again to continue printing.
Press & hold the Print Button while the printer is IDLE to advance
label media. The printer will continue advancing label media until
the Print Button is released.
Table 3-2

Print Button Description

Description
224/424 Operator's Manual - 880027-0141
Chapter 3