Table of Contents
Advertisement
Kontron
Display Control Submenu
14.7.2.
This submenu is only available in BIOS revisions MOD6R124 or later. It allows you to select
your type of display monitor as well as the flat panel type. You can also enter values for
backlight and contrast if your application supports these features.
Feature
Display Mode
JDA Revision
Flat Panel Type
1
ID
2
LCD Backlight
3
LCD Contrast
1
Notes:
Only available if Flat Panel Type (Enter PAID) or (Enter FPID) are selected.
2
Only available if the DAC (MAX5362) is on the OEM backplane or the panel adapter.
3
Only available if the digitally controlled potentiometer (Xicor X9429) is on the OEM backplane or the panel
adapter
Boot Utilities
14.8
QuietBoot
14.8.1.
Upon turn on or reset, QuietBoot displays a graphical logo instead of a text-based POST
screen, which displays diagnostic messages.
The graphical logo is visible until just before the OS-load unless:
!
<Esc> is pressed to display the POST screen
!
<F2> is pressed to enter Setup
!
POST issues an error message
!
The BIOS or an option ROM requests keyboard input
MultiBoot
14.8.2.
Multiboot allows you to select the following boot device:
ETX-P3/C3 User's Guide
Option
LCD only
CRT only
Simultan
N/A
Auto Detect
VGA
SVGA
XGA
Enter PAID
Enter FPID
0-FFFFh
Default 0
0-255
Default 128
0-63
Default 32
43
Description
Select the mode of display.
Displays the revision of the JILI Data Area
Select Auto Detect to automatically detect the panel
type or use VGA, SVGA, or XGA for fixed panel
types. Choose Enter PAID or Enter FPID to
manually set JILI3 ID values.
Enter the JILI3 ID.
Enter a value to adjust backlight of the LCD.
Enter a value to adjust contrast of the LCD.
Appendix C: BIOS Operation
Advertisement
Table of Contents
