Pci Configuration Submenu; Pci/Pnp Isa Umb Region Exclusion Submenu - Kontron ETX-C3 User Manual

PCI Configuration Submenu

14.4.2.
Feature
PCI IRQ line 1
PCI IRQ line 2
PCI IRQ line 3
PCI IRQ line 4
8PCI/PNP ISA UMB Region Exclusion
8PCI/PNP ISA IRQ Resource Exclusion
Default Primary Video Adapter
ISA graphics device installed
Assign IRQ to PCI VGA
Notes: In the Option column, bold indicates the default setting.
PCI add-in cards are initialized with option ROM scan enabled, PCI bus master enabled (if supported), and
latency timer set to 40h.

PCI/PNP ISA UMB Region Exclusion Submenu

14.4.3.
Feature
CC00 – CFFF
D000 – D3FF See above.
D400 – D7FF See above.
D800 – DBFF See above.
DC00 – DFFF See above.
Note: In the Option column, bold shows default settings.
Appendix C: BIOS Operation
Disabled
Auto
IRQ3, 4, 5, 7,
9, 10, 11, 12,
14, 15
See above
See above
See above
Submenu
Submenu
AGP
PCI
No
Yes
No
Yes
Option
Available Reserves specified block of upper memory for legacy ISA devices.
Reserved
36
Option
Select IRQ for PIC interrupt INTA. Select Auto
to let the BIOS assign the IRQ.
Select IRQ for PIC interrupt INTB. Select Auto
to let the BIOS assign the IRQ.
Select IRQ for PIC interrupt INTC. Select Auto
to let the BIOS assign the IRQ.
Select IRQ for PIC interrupt INTD. Select Auto
to let the BIOS assign the IRQ.
Opens UMB Region Exclusion submenu.
Opens IRQ Exclusion submenu.
In a system with an AGP and a PCI video
adapter an end user can select the adapter
that the BIOS will initiate.
PCI devices may need to know if an ISA
graphics device is installed in the system to
enable that card to function correctly.
Determines if a PCI VGA device obtains an
IRQ assigned. Win98SE has shutdown
problems if a PCI VGA controller does not
have an IRQ assigned.
Description
See above.
See above.
See above.
See above.
Kontron
Description
ETX-P3/C3 User's Guide