TTI TCB-R2000 Instruction Manual page 15

- Professional Menu Mode
Pressing and holding the up button of the Remote LCD unit, turn on the transceiver.
The LCD tells that you have entered the professional menu mode.
The first ones are the same normal menu mode items and the professional menu
mode items follow.
SQT-TONE
STATE : (ON,OFF)
ROGER
STATE : (ON,OFF)
BEEP
STATE : (ON,OFF)
BACK LIGHT DIMMER
(High,Low,Off)
QUICK
CH-STEP ; (,5,10,15)
EXT SPEAKER
STATE : (AUTO,OFF)
ID EDIT
(XXX XXX)
SCAN RECEIVER
TIME:(01-99,CONT.)
SCAN DELAY
TIME : (01-99.OFF)
CALL
SELECT: (OFF,1-5)
TCB-R2000
TCBR2000 man_reized.indd 15
Display
Reduction of noisy squelch
MENU
tail.
Both of the transmitting ra-
dio and the receiving radio
should be in the same selec-
tion to properly work.
MENU
Roger beep tone on or off
MENU
Key beep tone on or off
MENU
Back light dimmer selec-
tion
MENU
Step selection for quick
channel up/down
MENU
Controlling
speaker upon its connection
ID writing: Use the volume
MENU
knob to select the alphabet
or number and use the chan-
nel up/down button to move
to the next letter.
MENU
Timer selection during scan-
ning and
signal.
MENU
Timer selection after effec-
tive signal has disappeared.
Call(page) selection.
MENU
The call tone can be heard
from the receiving radios
only.
MENU MODE
Functions
the external
Max.1 characters to
upon effective
(Continuously staying
while there is signal)
(Immediate Scanning
Settings
ON,OFF
ON,OFF
ON,OFF
LOW,HIGH.OFF
,5,10,15 Channels
AUTO,OFF
be written.
01-99 sec, CONT
01-99 sec, OFF
Resumed)
01-05, OFF
English 15
2011.3.14 5:34:23 PM