Setting Functions By Remote Control - Aastra 610d User Manual

Hide thumbs Also See for 610d:

Table of Contents

Supplementary features

Setting functions by remote control

This section explains how you can alter your phone's settings even if you are not

directly at your phone.

You are not at your desk and want to set various functions on your phone from a dif-

ferent phone.

You can activate/deactivate many of your phone's functions by remote control from a

different phone.

The remote control is initiated using a special function code. You can then enter the

function commands and function codes.

Using remote control from a third-party phone:

1. Enter function code #06.

2. Enter your phone number.

3. Enter your PIN.

4. Enter the function code for activating/deactivating the function you want.

Press the Call key.

➔

Acknowledgement tone sounds; function is activated/deactivated.

Note:

The default PIN setting "0000" is not accepted. First change the PIN as

described in chapter

"Changing the User

code *47 (see "User's Guide Function Codes" on the Aastra 400

DocFinder: www.aastra.com/docfinder). If you have forgotten your PIN, your

system administrator can reset it to the default setting.

PIN", page

or use function

eud-1290/1.1 – R2.0 – 02.2012

Table of Contents