Setting Functions By Remote Control - Aastra 5360 User Manual

Setting functions by remote control

This section explains how you can alter your phone's settings even if you are not
directly at your phone.
You are not at your desk and want to set various functions on your phone from a dif-
ferent phone.
You can activate/deactivate many of your phone's functions by remote control from a
different phone.
The remote control is initiated using a special function code. You can then enter the
function commands and function codes.
<Setting value>
eud-1279/1.1 – R2.0 – 02.2012
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you want.
Pick up the handset.
➔
You hear the acknowledgement tone.
Put the handset on-hook.
➔
The function is now activated/deactivated.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the
(see "User's Guide Function Codes" on the Aastra 400
DocFinder: www.aastra.com/docfinder). If you have forgotten your PIN, your
system administrator can reset it to the default setting.
Supplementary features
PIN", page 69 or use function code *47
63