Setting Functions By Remote Control - Aastra 610d User Manual

Setting functions by remote control

This section explains how you can change your phone's settings even if you are not directly at your
phone.
You are not at your desk and want to set various functions on your phone from a different
phone.
You can activate/deactivate many of your phone's functions by remote control from a different
phone.
The remote control is initiated using a special */# procedure. You can then enter the function
commands and */# procedures.
<Setting value>
Aastra 610d
Using remote control from a third-party phone:
1. Enter */# procedure #36.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the */# procedure for activating/deactivating the function you want.
Press the Call key.
➔
Acknowledgement tone sounds; function is activated/deactivated.
Note:
The factory setting "0000" is not accepted. First change the PIN as described in
chapter "Changing the
Guide */# Procedures"). If you have forgotten your PIN, your system administra-
tor can reset it to the factory setting.
Supplementary features
PIN", page 56 or use the */# procedure *47 (see "User's
45