Table of Contents
Advertisement
caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times. Also, it's a
good idea to write down
your password.
Hold down
Fine-Tuning the Projector
78
Enabling Password Protection
The default setting for the password is
create a new password:
1. Press the
button on the remote control for five to seven
Freeze
seconds. You see this screen:
2. Select the type(s) of password protection you want to use:
■
Power On Protect
projector. After the projector is plugged in and turned on,
you must enter a password to use the projector. Select
press
, then press
Enter
screen.
■
User's Logo Protect
page 80), display, and User's Logo settings in the Extended
menu from being changed. Select
to return to the Password Protect screen.
Esc
3. Use the arrow buttons to select
4. When you see a message asking if you want to change the
password, select
Yes
5. Hold down the
Num
a four digit password.
6. When you see a confirmation message, reenter the password.
7. Press the
button, then press
Menu
8. Turn off and unplug the projector.
. Follow these steps to
0000
: Prevents unauthorized use of the
to return to the Password Protect
Esc
: Prevents your custom screen (see
, press
On
and press
Password
and press
.
Enter
button and use the numeric keypad to enter
to exit the screen.
Enter
,
On
, then press
Enter
.
Enter
Advertisement
Table of Contents
