Enabling Password Protection - Epson BrightLink 455Wi User Manual

caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times. Also, it's a
good idea to write down
your password.
Hold down
Using the Projector Menus
94

Enabling Password Protection

The default setting for the password is
create a new password:
1. Press the button on the remote control for five to seven
Freeze
seconds. You see this screen:
2. Select the type(s) of password protection you want to use:
■
Power On Protect
projector. After the projector is plugged in and turned on,
you must enter a password to use the projector. Select
press , then press
Enter
screen.
■ User's Logo Protect
page 96), display, and User's Logo settings in the Extended
menu from being changed. Select
to return to the Password Protect screen.
Esc
■ Network Protect
being changed. Select
return to the Password Protect screen.
3. Use the arrow buttons to select
4. When you see a message asking if you want to change the
password, select
Yes
5. Hold down the
Num
a four digit password.
6. When you see a confirmation message, re-enter the password.
. Follow these steps to
0000
: Prevents unauthorized use of the
to return to the Password Protect
Esc
: Prevents your custom screen (see
, press
On
: Prevents any of the network settings from
, press , then press
On Enter
and press
Password
and press .
Enter
button and use the numeric keypad to enter
,
On
, then press
Enter
to
Esc
.
Enter