Table of Contents
Advertisement
You can remove the air filter to clean both sides.
If the filter is too dirty or broken, replace the filter as described below.
Replacing the Air Filter
You need to replace the air filter if:
You cannot remove the dust from it
■
■
The air filter is damaged or torn
■
You repeatedly see a projected message telling you to clean or
replace it
1. Turn off the projector and unplug the power cord.
2. Open the air filter cover on the side of the projector.
3. Lift the air filter out of its slot as shown.
note
When purchasing
replacement air filters,
request part number
V13H134A25. Contact
Epson for dealer referral as
described on page 105.
note
Air filters contain
polycarbonate, ABS resin,
and polyurethane foam.
Dispose of used air filters
according to local
regulations.
Maintaining the Projector
85
Advertisement
Table of Contents
