Table of Contents
Advertisement
4. If you are not connected to another image source, the Slideshow
program appears.
If you are connected to another image source, press the
button on the remote control to go to the Slideshow program.
5. See page 64 for instructions on controlling the slideshow.
6. When you're finished, press
Slideshow before turning off or removing the USB device.
Be sure to turn off your USB device (if necessary) before you remove
the device or cable from the projector. Failure to do so may damage
the device and/or the projector.
Turning the Projector On and Off
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 48).
Follow these steps to turn on the projector:
1. Open the
A/V Mute
PowerLite S10+
and select
Esc
Exit
slide (lens cover).
PowerLite X10+/PowerLite W10+
USB
to exit the
Setting Up the Projector
43
Advertisement
Table of Contents
