Enabling Password Protection - Epson PowerLite 1825 User Manual

Enabling Password Protection

The default setting for the password is
create a new password:
1. Press the button on the remote control for about five
Freeze
seconds. You see this screen:
2. Use the pointer button to select
3. When you see a message asking if you want to change the
password, select
Yes
4. Hold down the
Num
the numeric keypad to enter a four digit password. (The default
setting is 0000.)
5. When you see a confirmation message, reenter the password.
Then press the
Menu
To set security options, access the Password Protect screen as
described above, and then turn on any of the following options:
■
Power On Protect
After the projector is plugged in and turned on, you must enter a
password to use the projector. For details, see page 146.
■ User's Logo Protect
settings from being changed. None of the User's Logo features in
the Extended menu can be changed when the User's Logo Protect
function is enabled. For details on creating a custom screen, see
page 146.
■
Network Protect
system (see page 59).
. Follow these steps to
0000
Password
and press .
Enter
button on the remote control and use
button to exit the screen.
to prevent unauthorized use of the projector.
to prevent your custom screen and display
to lock the Network settings in the menu
and press .
Enter
Fine-Tuning the Projector
caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times. Also, it's a
good idea to write down
your password.
Hold down
145