Table of Contents
Advertisement
Solving Problems
98
The attached computer may be in sleep mode or displaying a
■
black screen saver. Try pressing a key on the computer.
If you are projecting from a DVD player or other video source,
■
make sure you turn it on and press its
If you are projecting from a composite or S-Video video source,
■
make sure the Video Signal setting is correct (see page 71).
You can also try resetting all of the menu settings (see page 69).
■
You've connected a computer and see a blue screen with the
message
displayed.
No Signal
Make sure the cables are connected correctly, as described
■
beginning on page 29.
If you've connected a computer and one or more video sources,
■
you may need to press the
correct source. Allow a few seconds for the projector to sync up
after pressing the button.
Make sure the power for your connected equipment is turned on.
■
If you're using a PC notebook:
On most systems, there's a function key that lets you toggle
■
between the LCD screen and the projector, or display on both at
the same time. It may be labeled
. You may have to hold down the
Allow a few seconds for the projector to sync up after changing
the setting.
Press the function key on your keyboard that lets you display on
■
an external monitor. It may have an icon such as
be labeled
CRT/LCD
while pressing it. Allow a few seconds for the projector to sync up
after changing the setting. Check your notebook's manual or
online help for details.
On most systems, the
screen and the projector, or display on both at the same time.
Play
Source Search
or have an icon such as
CRT/LCD
Fn
. You may have to hold down the
key lets you toggle between the LCD
button.
button to select the
key while pressing it.
, or it may
key
Fn
Advertisement
Table of Contents
