7. Replace the lamp cover, then tighten its screw.
8. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector's menu system.
1. Press the
button on the remote control or on the
Menu
projector's control panel. You see the main menu.
2. Select the
menu and press
Reset
3. Select
Reset Lamp Hours
4. When you see the prompt, select
5. When you're finished, press
. You see this screen:
Enter
and press
.
Enter
press
Yes and
Enter
to exit.
Menu
note
Tighten the lamp cover
securely so you do not receive
a lamp cover error when you
turn the projector back on.
.
Maintaining the Projector
89