Sartorius CB Operating Instructions Manual page 32

32
Factory Settings of the Parameters
Transmission rate:
Parity:
Stop bits:
Handshake:
Communications mode: Standard SBI (5. 5. 1)
Manual/automatic
print mode:
Preparation
§ See sections on "Pin Assignment" and
"Cabling Diagram"
Data Output Format
You can output the values displayed including the
weight unit, either with or without data ID codes.
Example: without data ID code
+ 253 pcs
Example: with data ID code
Qnt + 253 pcs
Select the type of output in the menu
(menu: print formats 7. 1. 1, 7. 1. 2, 7. 1. 3 or 7. 1. 4).
The output without a data ID code has 16 characters;
with the data ID code, 22 characterS.
1,200 baud (5. 1. 4)
Odd (5. 2. 3)
1 stop bit (5. 3. 1)
Hardware handshake,
2 characters after
CTS (5. 4. 2)
Manual after stability
(6. 1. 2)