Sartorius CB Operating Instructions Manual page 27

Menu 1. through 2.
3. Application
parameters
5. Interface
6. Printing
8. through 9.
* = To operate the YDP04IS-0CE, also configure the following menu codes:
– 5.1.7 "9,600 baud"
– 5.2.2 "space parity"
– 5.3.2 "2 stop bits"
– 5.4.2 "hardware handshake, 2 characters after CTS"
See previous page
3.5. Storage parameter
3.6. Reference
sample updating
3.7. Autotare when
[START] key is pressed
5.1. Baud rate
5.2. Parity
5.3. Number of
stop bits
5.4. Handshake mode
5.5. Communications
mode
6.1. Manual/auto
print mode
See next page
3.5.1 o With stability
3.5.2 With higher stability
3.6.1 Off
3.6.2 o Automatic
3.7.1 Off
3.7.2 o On
5.1.1 150 baud
5.1.2 300 baud
5.1.3 600 baud
5.1.4 o 1,200 baud
5.1.5 2,400 baud
5.1.6 4,800 baud
5.1.7 9,600 baud
5.2.1 Mark
5.2.2 Space
5.2.3 o Odd
5.2.4 Even
5.3.1 o 1 stop bit
5.3.2 2 stop bits
5.4.1 Software handshake
5.4.2 o Hardware handshake,
1 character after CTS
5.4.3 Hardware handshake,
2 characters after CTS
5.5.1 o PC, YDP03 printer (SBI)
5.5.2 YDP04IS-0CE* printer
6.1.1 Manual without stability
6.1.2 o Manual after stability
6.1.3 Automatic without stability
6.1.4 Automatic at stability
27