Power; Connecting To The Network - BT Falcon Mk 2 User Manual

4. Power

Plug the power lead into the socket labelled
DC at the back of the telephone. Plug the
other end into the mains socket and switch
on. If your network supports power over
Ethernet (PoE) your BT Falcon IP Phone
can be powered from a powered Ethernet
switch via the Ethernet cable. In this case
the mains power adapter is not required.
If you experience any problems, please call the Helpline on 0800 169 1146 or go to www.bt.com/business/broadbandvoice

5. Connecting to the network

Ensure your router has power and an internet
connection. Connect the Ethernet cable
into the socket labelled LAN at the back of
the telephone and plug the other end into
the Ethernet port of the router or Ethernet
switch as appropriate.
You can connect a network device to the
Ethernet port, labelled PC, of your BT
Falcon IP Phone.
7