Table of Contents
Advertisement
5958 Relate 3000 UG [1]
Getting started
6
WARNING
Do not place your BT Relate 3000 in
the bathroom or other humid areas.
Battery low warning
When your batteries need replacing
the battery low icon is displayed.
Replace the batteries by following
the steps for battery installation.
Battery performance
New batteries will power your
BT Relate 3000 display for approx.
18 months provided you are also
using the mains adaptor to power
your BT Relate 3000. If you do not
use the power supply then the
battery life is approximately 6 months.
Even if your batteries run out or are
removed, your BT Relate 3000 will
retain any personalised settings for:
One-touch Quickdial memories
Display contrast
Voice prompt
VIP ringer
Loudspeaker volume
Ring tone
All manuals and user guides at all-guides.com
12/2/04
11:47 am
Page 6
BT Relate 3000 ~ Issue 2 ~ Edition 01 ~ 11.02.04 ~ 5958
Location
Make sure your BT Relate 3000 is close enough to a
telephone socket so that the cable will reach.
Install the batteries
1. Turn the phone over, remove the battery compartment
cover, then insert the 4 AA alkaline batteries as indicated.
2. Replace the battery cover.
Connect the mains power adaptor
1. Plug the mains power adaptor into the POWER socket on
the base of your BT Relate 3000.
Advertisement
Table of Contents
