Getting Started; Setting Up; Connecting The Handset; Connecting The Headset - BT Falcon Mk 2 User Manual

Getting started

Setting up

1. Connecting the handset

Connect one end of the handset
cord into the handset and the
other end into the socket at the
back of your BT Falcon IP Phone
marked with .
Place the handset in the cradle
on the telephone.
6

2. Connecting the headset

If you use a headset, connect
the plug (RJ-45 connector)
of your headset into the port
at the back of the telephone
marked with .
Press the button to
activate the headset mode.

3. Connect stand

Attach the stand to
the underneath of the
telephone by inserting
the short tabs into the
smaller holes at the back
first and then inserting the
longer tabs into the larger,
front holes.