999 or 112 call from your Switching silent mode on/off phone number, that’s the address the emergency services will see. If you use your BT Cloud Voice service at a different Basic call features address, the registered address does not Making calls automatically change.
This guide will tell you everything you need to know about your phone. To get started follow the simple instructions in this user guide or use the quick start guide that came with your phone. It’s quick and simple. Got everything? The following items are included in your W52P package • Base Station •...
PHONE INSTALLATION. Connecting the base station. There are two options for power and network connection of the base station. Your system administrator will let you know which one to use. AC power To connect the AC power you need to: 1.
Charging the handset. Once you’ve set up the handset and charger cradle, put the handset in the charger cradle. The original handset included in the W52P package is pre-registered to the base station. As soon as it’s charged, it’s ready for use.
25% Charged 10% Charged Almost Flat Provisioning your BT Cloud Voice When all connections are made, your BT W52P DECT Phone is pre-loaded with everything it needs to automatically provision the BT Cloud Voice service service. automatically. 1. When the phone is connected to the network port giving it network access, it’ll carry out a series of firmware updates (you’ll need to allow it time to do this).
PHONE INSTALLATION. The base station. Once the W52P base station has started up successfully and the handset is registered to the base station, all LEDs on the base station will illuminate green in sequence.. Item Description Helps you to find a misplaced handset.
GETTING TO KNOW YOUR PHONE. The handset. The main hardware components of the W52H handset are the LCD screen and the keypad. Hardware component instructions of the W52H handset are: Item Description Earpiece Gives you incoming sound during the call. Shows call information, handset status icons, LCD Screen prompt messages and so on.
GETTING TO KNOW YOUR PHONE. The LCD screen. The idle screen may be shown as below: Status Line Text Line Soft Key The LCD screen is split into three parts: status line, text line and soft key line. The status line shows: •...
GETTING TO KNOW YOUR PHONE. Icon instructions. Icons appearing on the LCD screen are described in the following table: Anonymous Call Anonymous Call Rejection Missed Call Voicemail Keypad Lock Silent Mode Do Not Disturb Call Forward Call Hold Call Mute Unassigned Outgoing Line Unusable Line Loudspeaker On...
BASIC OPERATIONS. Checking the system status. You can check the system status on your handset, including: • The base station status (e.g., IP address, firmware version, MAC address and device certificate status of the base station). • Handset status (e.g., hardware version, model, IPUI code and firmware version of the handset).
BASIC OPERATIONS. Registering your handset. A W52P base station can have up to 5 handsets registered to it, but it will only support 4 calls at the same time. To register a handset manually: 1. Start by long pressing on the base station.
BASIC CALL FEATURES. Making calls. To make a call directly: Enter the desired number when the handset is idle, and then press To make a call from the local directory: 1. Press when the handset is idle. 2. Press to select a contact/number, and then press If both the office and mobile numbers are stored, press to pick the number you are looking for, and then press...
BASIC CALL FEATURES. Call transfer. There are three ways to transfer a call: Blind Transfer 1. Press the Options soft key during a call, and then choose Transfer. 2. Then enter the number you want to transfer the call to. 3.
CONFIGURING HANDSETS AND LINES. Each W52P base station can have up to 5 handsets registered to it and provision up CONFIGURING HANDSETS AND to 5 lines, but it will only support 4 calls at the same time. The default set-up is based LINES.
Subject to the terms listed below, the guarantee will provide for wet) cloth, or an anti-static wipe. Never use household polish as the repair of, or at BT’s or its agent’s discretion, the option to this will damage the product. Never use a dry cloth as this may replace the Phone or any component thereof, (other than cause a static shock.