BT Hosted VoIP Quick Start Manual

BT Hosted VoIP – Quick Start Guide

Getting started

1. Getting started
Your BT Falcon Mk 2 IP
pack contains:
• BT Falcon phone
• BT Falcon User Guide
• Ethernet cable
• Power supply
Please ensure that you have a broadband connection on your
BT Business Hub
3. Insert stand
Your BT Falcon phone
stand clips into the
bottom of the phone.
5. Connect to hub
Using the ethernet
cable provided, plug
one end of the cable
into the ethernet
socket on the back
of your BT Business
Hub and plug the
other end of the
cable into the socket
on the back of the
BT Falcon phone,
labelled LAN.
IT • communications • support
2. Plug in handset
Plug your handset into the BT Falcon phone in the bottom
socket, labelled with the icon.
4. Plug in power
Plug the power adapter into your mains
power socket and then insert the plug
into the back of the BT Falcon phone in
the socket labelled DC.
6. Provision service
On your BT Falcon
phone red lights
will flash while the
phone provisions
your service (this will
take two minutes).
Once this has
taken place your
phone will display
'Broadband Voice'
and you will be
ready to make calls.
Bringing it all together
BT Hosted VoIP