Automatic Operation - Akai MWF-18CRN1-QC1G Instruction Manual

Automatic Operation

When you set the air conditioner in AUTO mode, it will
automatically select cooling, or fan only operation depending
on what temperature you have selected and the room
temperature. Once you select the operating mode, the
operating conditions are saved in the unit's microcomputer
memory. Thereafter, the air conditioner will start operating
under the same conditions when you simply push the ON/
OFF button of the remote controller cause remote controller
clock initialize. If your remote controller.
Start
Ensure the unit is plugged in and power is available. The
OPERATION indicator on the display panel of the indoor unit starts flashing.
1. Mode select button (MODE)
Press to select AUTO.
2. TEMP/TIME button
Set the desired temperature. Normally, set it between 21°C/ to 28°C/83°F.
3. ON/OFF button
When the remote controller is off, push this button to start the air conditioner
Stop
ON/OFF button
Push this button again to stop the air conditioner. If the AUTO mode is
uncomfortable, you can select the desired conditions manually. When you select
the AUTO mode, you do not have to set the fan speed. The fan speed will be
automatically controlled.
After Sales Support 1300 886 649
19