Korg R3 Effect Manual: W.rotspk (rotary Speaker Rotryspk (rotary Speaker)

Synthesizer / vocoder.
Hide thumbs
29. W.RotSpk
(Rotary Speaker)
RotrySpk
(Rotary Speaker)
This effect simulates a rotary speaker, and obtains a
more realistic sound by simulating the rotor in the low
range and the horn in the high range separately. The ef-
fect also simulates the stereo microphone settings.
If you want to use this effect as an insert effect, you
must select it for insert effect 1. In this case, you
won't be able to use insert effect 2.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Horn
Rotary Speaker
+
Rotor
Right
Mode Switch: Rotate/Stop
Speed Switch: Slow/Fast
Manual Speed Control
Mode Sw (Mode Switch)
Switches between speaker rotation and stop.
Ctrl Src (Mode Sw. Ctrl. Source)
Selects the modulation source that will control "Mode
Sw."
☞p.6 "Ctrl Src (Control Source)"
CtrlMode (Mode Sw. Ctrl. Mode)
Specifies how the modulation source selected by "Ctrl
Src" will be switched.
When "Ctrl Mode" = Toggle, the speaker rotates or
stops alternately each time you press the pedal. Each
time the value for the modulation source exceeds 64, the
speaker rotates or stops alternately.
When "Ctrl Mode" = Moment, the speaker is rotating. It
stops only when you press the pedal. Rotation will occur
when the value of the modulation source is less than 64,
and will stop when the value is 64 or greater.
Spk Ctrl (Speaker Control Type)
Selects whether the rotational speed will be controlled
by a switch or manually.
Speed Sw (Speed Switch)
Switches the speed of rotation if "Spk Ctrl" is set to
Switch.
If this parameter is assigned to "Fx Knob," setting
"Spk Ctrl" to Manual will change the assignment
to Speed.
Ctrl Src (Sw. Control Source)
If "Spk Ctrl" is set to Switch, this selects the modulation
source that will switch the speaker rotation speed be-
tween slow and fast.
☞p.6 "Ctrl Src (Control Source)"
Double Size
: IFX
: MFX
Dry / Wet
Mic Distance
Horn/Rotor
Mic Spread
Balance
Speaker Simulation
Dry / Wet
Mode Sw Control Sorce
Speed Sw Control Sorce
Speed Control Sorce
[Rotate, Stop]
[Off, Velocity...MIDI3]
[Toggle, Moment]
[Switch, Manual]
[Slow, Fast]
[Off, Velocity...MIDI3]
CtrlMode (Sw. Ctrl. Mode)
If "Spk Ctrl" is set to Switch, this selects the switching
mode of the modulation source that will switch the
speaker rotation speed between slow and fast.
When "CtrlMode" = Toggle, the speed is switched be-
tween slow and fast each time you press the pedal.
Slow/fast will alternate each time the value of the mod-
ulation source exceeds 64.
When "CtrlMode" = Moment, the speed is usually slow.
It becomes fast only when you press the pedal. When a
value for the modulation source is less than 64, "slow"
speed is selected, and when the value is 64 or higher,
"fast" is selected.
Speed
If "Spk Ctrl" is set to Manual, this specifies the speaker
rotation speed.
If this parameter is assigned to "Fx Knob," setting
"Spk Ctrl" to Switch will change the assignment to
Speed Sw.
Ctrl Src (Speed Ctrl.Source)
If "Spk Ctrl" is set to Manual, this selects the modulation
source that will control the speaker rotation speed.
☞p.6 "Ctrl Src (Control Source)"
Ctrl Int (Speed Ctrl.Int)
If "Spk Ctrl" is set to Manual, this specifies the depth to
which the modulation source will control the speaker
rotation speed.
H/R Bal (Horn/Rotor Balance)
Sets the level balance between the high-range horn and
low-range rotor.
HrnAccel (Horn Acceleration)
How quickly the horn rotation speed in the high range
is switched. On a real rotary speaker, the rotation speed
is accelerated or decelerated gradually after you switch
the speed. The "Horn Acceleration" parameter sets the
speed at which the rotation is accelerated or decelerated.
HrnRatio (Horn Ratio)
Adjusts the rotational speed of the high-frequency horn.
A value of 1 is the normal speed, 0.5 is half speed, and
Stop will stop the rotor.
RtrAccel (Rotor Acceleration)
Determines how quickly the rotor rotation speed in the
low range is switched.On a real rotary speaker, the rota-
tion speed is accelerated or decelerated gradually after
you switch the speed. The "HrnAccel" parameter sets
the speed at which the rotation is accelerated or deceler-
ated.
RtrRatio (Rotor Ratio)
Adjusts the (low-range side) rotor rotation speed.A val-
ue of 1 is the normal speed, 0.5 is half speed, and Stop
will stop the rotor. RtrAccel (Rotor Acceleration)
MicDstnc (Mic Distance)
Sets the distance between the microphone and the rotary
speaker. Increasing this value will increase the distance.
Effect parameters
[Toggle, Moment]
[001...127]
[Off, Velocity...MIDI3]
[–63...+63]
[Rotor, 1:99...99:1, Horn]
[000...127]
[Stop, 0.50...2.00]
[000...127]
[Stop, 0.50...2.00]
[000...127]
25

Advertising

   Also See for Korg R3

   Related Manuals for Korg R3

Comments to this Manuals

Symbols: 0
Latest comments: