Distort (Distortion) - Korg R3 Effect Manual

Effect guide
B2 Q
Sets the bandwidth of Band 2. This parameter will be
displayed and can be set if "B1 Type" is Peaking.
B2 Gain
Sets the gain of Band 2.
B3 Freq (B3 Frequency)
Sets the center frequency of Band 3.
only MFX
B3 Q
Sets the bandwidth of Band 3.
only MFX
B3 Gain
Sets the gain of Band 3.
B4 Freq (B4 Frequency)
Sets the center frequency of Band 4.
only MFX
B4 Q
Sets the bandwidth of Band 4.
only MFX
B4 Gain
Sets the gain of Band 4.
8
[00.5...10.0]
[–18.0...+18.0dB]
only MFX
[20Hz...20.0kHz]
[00.5...10.0]
[–18.0...+18.0dB]
only MFX
[20Hz...20.0kHz]
[00.5...10.0]
[–18.0...+18.0dB]
7. Distort
(Distortion)
This is a distortion effect with a three band EQ, giving
you a broad range of variations.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Pre EQ
+
Distortion
Right
Gain
Sets the degree of distortion.
Pre Freq (Pre EQ Frequency)
Sets the center frequency of Pre EQ.
Pre Q (Pre EQ Q)
Sets the bandwidth of Pre EQ.
Pre Gain (Pre EQ Gain)
Sets the gain of Band PreEQ.
B1 Freq (B1 Frequency)
Sets the center frequency of Band 1.
B1 Q
Sets the bandwidth of Band 1.
B1 Gain
Sets the gain of Band 1.
B2 Freq (B2 Frequency)
Sets the center frequency of Band 2.
B2 Q
Sets the bandwidth of Band 2.
B2 Gain
Sets the gain of Band 2.
B3 Freq (B3 Frequency)
Sets the center frequency of Band 3.
B3 Q
Sets the bandwidth of Band 3.
B3 Gain
Sets the gain of Band 3.
OutLevel (Output Level)
Sets the output level.
Dry / Wet
3 Band PEQ
Output Level
Dry / Wet
[000...127]
[20Hz...20.0kHz]
[00.5...10.0]
[–18.0...+18.0dB]
[20Hz...20.0kHz]
[00.5...10.0]
[–18.0...+18.0dB]
[20Hz...20.0kHz]
[00.5...10.0]
[–18.0...+18.0dB]
[20Hz...20.0kHz]
[00.5...10.0]
[–18.0...+18.0dB]
[000...127]