Table of Contents
Advertisement
24. S.Tremol
(Stereo Tremolo)
This effect modulates the volume level of the input sig-
nal. The effect is stereo, and offsetting the LFO of the left
and right phases from each other produces a tremolo ef-
fect between left and right.
Stereo In - Stereo Out
Left
Right
LFO
LFO Shape
ModDepth (Modulation Depth)
Sets the depth of internal LFO modulation.
LFO Sync (LFO BPM Sync)
Specifies whether the LFO cycle will be synchronized with
the tempo specified by the [TEMPO] knob or MIDI clock.
☞p.5 "LFO Sync (LFO BPM Sync)"
LFO Freq (LFO Frequency)
Sets the internal LFO speed if "BPM Sync" is Off.
☞p.5 "LFO Freq (LFO Frequency)"
SyncNote (LFO SyncNote)
Sets the internal LFO frequency as a proportion of the
tempo set by the [TEMPO] knob if "BPM Sync" is On.
☞p.5 "SyncNote (LFO SyncNote)"
LFO Wave (LFO Waveform)
[Saw, Square, Triangle, Sine, S&H]
Selects the internal LFO waveform.
☞p.5 "LFO Wave (LFO Waveform)"
LFOShape (LFO Shape)
Adjusts the shape of the internal LFO waveform.
☞p.5 "LFOShape"
Key Sync (LFO KeySync)
Specifies whether the LFO will be reset by note-on.
☞p.5 "Key Sync (LFO KeySync)"
IniPhase (LFO Init Phase)
Sets the starting location of the waveform if "Key Sync"
is Timbre.
☞p.5 "IniPhase (LFO Init Phase)"
LFOSpred (LFO Spread)
Sets the internal LFO phase difference between the left
and right channels.
Dry / Wet
Tremolo
Tremolo
Dry / Wet
LFO Spread
[000...127]
[Off, On]
[0.01...100.0Hz]
[8/1...1/64]
[–63...+63]
[Off, Timbre]
[000...180°]
[–180...+180°]
25. S.RingMd
(Stereo Ring Modulator)
This effect creates a metallic sound by applying the os-
cillators to the input signal. Use the LFO or Dynamic
Modulation to modulate the oscillator to create a radical
modulation. Matching the oscillator frequency with a
note number will produce a ring modulation effect in
specific key ranges.
Stereo In - Stereo Out
Left
Pre LPF
Pre LPF
Right
Fixed
Fixed Frequency
OSC Mode
Note Offset, Fine
Note No.
Note (Key Follow)
LFO
OSC Mode (Oscillator Mode)
Switching between specifying the oscillator frequency
and using a note number.
If this is set to Note, the oscillator frequency will track
the note of the input signal.
FixedFrq (Fixed Frequency)
This parameter sets the oscillator frequency when "OSC
Mode" is set to Fixed.
If this parameter is assigned to "Fx Knob," setting
"OSC Mode" to Note will switch the assignment
to NoteOfst.
NoteOfst (Note Offset)
Sets the pitch difference from the original note in semi-
tone steps when "OSC Mode" is set to Note.
NoteFine (Note Fine)
Sets the pitch difference from the original note in cent
steps when "OSC Mode" is set to Note.
By setting "NoteOfst" and "NoteFine" so that the
oscillator frequency will track the note that is in-
put, you can produce a ring modulator effect with
a correct scale.
OSC Wave (OSC Waveform)
Selects the ocsillator waveform.
LFO Int (LFO Intensity)
Sets the depth of internal LFO modulation.
LFO Sync (LFO BPM Sync)
Specifies whether the internal LFO cycle will be syn-
chronized with the tempo specified by the [TEMPO]
knob or MIDI clock.
☞p.5 "LFO Sync (LFO BPM Sync)"
LFO Freq (LFO Frequency)
Sets the internal LFO speed when "BPM Sync" is Off.
☞p.5 "LFO Freq (LFO Frequency)"
Effect parameters
Dry / Wet
Ring Modulator
Ring Modulator
Dry / Wet
Oscillator
Pitch
[Fixed, Note]
[0...12.0kHz]
[–48...+48]
[–100...+100cent]
[Saw, Triangle, Sine]
[–63...+63]
[Off, On]
[0.01...100.0Hz]
21
Advertisement
Table of Contents
