Table of Contents
Advertisement
Resonanc (Resonance)
Sets the intensity of resonance for the voice pattern. A
larger value will add more character to the sound.
Drive
Sets the degree of distortion.
Mod Src (Modulation Source)
Selects the modulation source.
Mod Int (Modulation Intensity)
Sets the depth of modulation produced by the modula-
tion source.
Response (Mod Response)
Adjusts the response to the modulation effect. A setting
of 0 produces a slow response.
Env Sens (Envelope Sensitivity)
When "Mod Src" is Auto, adjusts the sensitivity of auto
operation.
EnvShape (Envelope Shape)
When "Mod Src" is Auto, specifies the sweep curve.
LFO Sync (LFO BPM Sync)
Specifies whether the LFO cycle will be synchronized
with the tempo specified by the [TEMPO] knob or MIDI
clock.
☞p.5 "LFO Sync (LFO BPM Sync)"
LFO Freq (LFO Frequency)
Sets the LFO speed if "BPM Sync" is Off.
☞p.5 "LFO Freq (LFO Frequency)"
SyncNote (LFO SyncNote)
Sets the LFO frequency as a proportion of the tempo set
by the [TEMPO] knob if "BPM Sync" is On.
☞p.5 "SyncNote (LFO SyncNote)"
LFO Wave (LFO Waveform)
[Saw, Square, Triangle, Sine, S&H]
Selects the LFO waveform.
☞p.5 "LFO Wave (LFO Waveform)"
LFOShape (LFO Shape)
☞p.5 "LFOShape"
Key Sync (LFO Key Sync)
Specifies whether the LFO will be reset by note-on.
☞p.5 "Key Sync (LFO KeySync)"
IniPhase (LFO Init Phase)
Sets the starting location of the waveform if "Key Sync"
is Timbre.
☞p.5 "IniPhase (LFO Init Phase)"
Ctrl Src (Control Source)
Selects the control source. The selected source will con-
trol the filter if "Mod Src" is Ctrl.
☞p.6 "Ctrl Src (Control Source)"
[000...127]
[000...127]
[Auto, LFO, Ctrl]
[–63...+63]
[000...127]
[000...127]
[–63...+63]
[Off, On]
[0.01...100.0Hz]
[8/1...1/64]
[–63...+63]
[Off, Timbre]
[000...180°]
[Off, Velocity...MIDI3]
Effect parameters
27
Advertisement
Table of Contents
