039: Pitchshft Mod (Pitch Shift Modulation); 040: Rotary Sp (Rotary Speaker) - Korg Karma Parameter Manual

039: PitchShft Mod
(Pitch Shift Modulation)
This effect modulates the detuned pitch shift amount using an
LFO, adding a clear spread and width to the sound by pan-
ning the effect sound and dry sound to the left and right. This
is especially effective when the effect sound and dry sound
output from stereo speakers are mixed.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Right
LFO: Tri / Sqr
Pitch Shift
a
Sets the pitch difference from the input signal
LFO Wave (LFO Waveform)
b
Selects LFO Waveform
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Depth
Sets the LFO modulation depth for pitch shift amount
(Source)
e
Selects the modulation source of the depth of modulation
(Amount)
Sets the modulation amount of the depth of modulation
Pan
f
Sets the panning effect sound and dry sound separately
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
g
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: Pitch Shift [cent], e: Depth
These parameters set the amount of pitch shift and amount of
modulation by means of the LFO.
Pitch
Original Pitch
f: Pan, g: W/D
The Pan parameter pans the effect sound and dry sound to the left
and right. With L, the effect sound is panned left, and the dry
sound is panned right. With a W/D = Wet setting, the effect and
dry sound will be output in a proportion of 1:1.
190
Pitch Shifter
Pan
–100...+100cent
Triangle, Square
0.02...20.00Hz
Fx:009,
–20.00...+20.00Hz
Fx:009,
MIDI, 40...240
L, 1:99...99:1, R
Dry, 1:99...99:1, Wet
Pitch Shift Mod - Pitch Shift / Depth
LFO Waveform=Triangle
Depth (+value)
Pitch Shift (+ value)
LFO Waveform=Square
Depth (–value)
040: Rotary SP
(Rotary Speaker)
This effect simulates a rotary speaker, and obtains a more real-
istic sound by simulating the rotor in the low range and the
horn in the high range separately. The effect also simulates the
stereo microphone settings.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Wet / Dry
+
Right
D -mod
Wet / Dry
D -mod
D -mod
Mode (Mode Switch)
Switches between speaker rotation and stop
(Source)
Selects the modulation source that toggles between rotation and
a
stop
(Sw)
Off...Tempo
Selects switching mode of the modulation source that toggles
between rotation and stop
Speed (Speed Switch)
Switches the speaker rotation speed between slow and fast
Off, On
(Source)
b Selects the modulation source that toggles between slow and fast
(Sw)
Selects switching mode of the modulation source that toggles
Fx:009
between slow and fast
H/R.Bal (Horn/Rotor Balance)
Fx:009
Sets the level balance between the high-range horn and low-range
rotor
1...16
c
Fx:009
ManuSp (Manual Speed Control)
Selects the modulation source in case the rotation speed is changed
–100...+100
directly
,
Horn Accel (Horn Acceleration)
Off...Tempo
How quickly the horn rotation speed in the high range is switched
d
–100...+100
Ratio (Horn Ratio)
Adjusts the (high-range side) horn rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
Rotor Accel (Rotor Acceleration)
Determines how quickly the rotor rotation speed in the low range is
switched
,
e
Ratio (Rotor Ratio)
Off...Tempo
Adjusts the (low-range side) rotor rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
–100...+100
MicDistance
Sets the distance between the microphone and rotary speaker
f
Spread (Mic Spread)
Sets the angle of left and right microphones
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
g
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: (Sw)
This parameter sets how the modulation source switches between
rotation and stop.
When "Sw" = Tggl (Toggle), the speaker rotates or stops alter-
nately each time you press the pedal or operate the joystick.
Each time the value for the modulation source exceeds 64,
the speaker rotates or stops alternately.
When "(Sw)" = Mmnt (Moment), the speaker is rotating. It stops
Horn
Rotary Speaker
Horn/Rotor
Balance
Rotor
Speaker Simulation
Mode Switch: Rotate/Stop
Speed Switch: Slow/Fast
Manual Speed Control
Wet / Dry
Mic Distance
Mic Spread
Wet / Dry
Rotate, Stop
Off...Tempo
Tggl, Mmnt
Slow, Fast
Off...Tempo
Tggl, Mmnt
Rot, 1...99, Hrn
Off...Tempo
,
0...100
Stop, 0.50...2.00
0...100
Stop, 0.50...2.00
0...100
0...100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100