Setting Up A Transition; Setting The Transition Time - Sony DFS-700 Service Manual

Inserting Characters and Graphics (2) — Downstream Key
To mask a part of the downstream key
You can mask out unwanted portions of a downstream key (text or
graphics).
To use the mask function, use the following procedure.
EDITOR
GPI
SET UP
SHIFT
AUXILIARY
BLACK
BACKGROUND
BLACK
FOREGROUND
BLACK
1
In the DSK section of the menu control section, press the MASK
button, turning it on.
The mask menu (DKMSK) appears in the menu display.
DKMSK
1/1
PAGE
2
Turn the F1(Left), F2(Right), F3(Top), and F4(Bottom) knobs to set
the mask region.
Removing the mask
Press the MASK button lit in step 1, turning it off.
To invert the mask
In the mask menu, press the F5(INVERT) button, setting the parameter to
"ON".
3-50
Chapter 3 Basic Operation
1 2
USER PGM SNAP SHOT
TITLE DSK EDGE
1 2
STATUS EDIT
LUM LUM LUM TRAIL
SHADOW
CRK CRK BORDER BEVELD
EDGE INITIAL EDIT LEARN
MASK MASK MASK SOFT
RECALL
CCR LIGHTING MATTES BORDER PATTERN PAGE F1 F2 F3 F4 F5 HOLD LOCATION
ADJ
INPUT
EFFECT
TRANS RATE DSK PATTERN NUMBER
FTB
SET SET
CCR TITLE 1 TITLE 2 DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT N/R REV DIRECT DIRECT DSK PVW
SOURCE SOURCE FILL RECALL PATTERN
LAST X FADE
TO
7 8 9 BLACK
1 2 3 4 5 6 7 8 MEMORY INT TITLE INS
VIDEO
4 5 6 DEL
INT
1 2 3 4 5 6 7 8 MEMORY CUT
VIDEO P IN P
DSK
1 2 3
RST
DOWN UP ENTER
0
AUTO
1 2 3 4 5 6 7 8 MEMORY INT
TRANS
VIDEO
PATTERN/KEY PAD
Left Right Top Bottom INVERT
–400-400 –400-400 –300-300 –300-300 OFF
F1 F2 F3 F4 F5

Setting Up a Transition

This section describes how to set the transition time and transition
direction.

Setting the Transition Time

The transition time measures the duration of an effect in frames (1/30
second (NTSC) or 1/25 second (PAL)), ranging from 0 to 999 frames.
In this system, you can set the transition time for a downstream key or
fade-to-black independently of the transition time for an effect.
Procedure
To set the transition time, use the following procedure.
1
EDITOR LUM
GPI CRK
SET UP MASK
SHIFT CCR
AUXILIARY
BLACK 1
BACKGROUND
1
BLACK
FOREGROUND
BLACK 1
1
Press the SET button in the effect transition section until the
appropriate display window mode indicator (EFFECT, DSK, or FTB)
is lit.
EFFECT: for setting the effect transition time
DSK: for setting the downstream key transition time
FTB: for setting the fade-to-black transition time
Note
If the EDIT button in the user program section is lit, it is not possible
to set the transition time. Press the EDIT button, turning it off.
2
With buttons 0 to 9 in the pattern/numeric keypad, enter the desired
transition time (0 to 999 frames).
The value entered appears in the TRANS RATE display window, and
dots appear to the lower right of the digits. You can use the UP and
DOWN buttons to adjust the value.
USER PGM SNAP SHOT
TITLE 2 DSK EDGE
STATUS EDIT
LUM LUM TRAIL
SHADOW
CRK BORDER BEVELD
EDGE INITIAL EDIT LEARN
MASK MASK SOFT
RECALL
LIGHTING MATTES BORDER PATTERN PAGE F1 F2 F3 F4 F5 HOLD LOCATION
ADJ
INPUT 1
EFFECT
TRANS RATE DSK PATTERN NUMBER
FTB SET
SET
CCR TITLE 1 TITLE 2 DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT N/R REV DIRECT DIRECT DSK PVW
SOURCE SOURCE FILL RECALL PATTERN
LAST X FADE
TO
7 8 9 INS BLACK
2 3 4 5 6 7 8 MEMORY INT TITLE
2
VIDEO
4 5 6 DEL
2 3 4 5 6 7 8 INT
MEMORY CUT
VIDEO P IN P
DSK
1 2 3 RST
3
DOWN UP ENTER
0
INT AUTO
2 3 4 5 6 7 8 MEMORY
VIDEO TRANS
PATTERN/KEY PAD
(continued)
Chapter 3 Basic Operation
3-51