Sony DFS-700 Service Manual page 45

Inserting Characters and Graphics (2) — Downstream Key
To invert the downstream key source signal
Depending on the desired sense of the key source signal (whether the
white or black portions form the key), in page 1 of the downstream key
menu make the following setting.
• For white lettering on a black background, press the F3(INVERT)
button, setting it to "OFF".
• For black lettering on a white background, press the F3(INVERT)
button, setting it to "ON".
Applying a border to a downstream key
You can apply a border to the text or graphics inserted as a downstream
key, and adjust the border color.
For details of adjusting the border color, see the section "Adjusting Color
Mattes" (page 3-57).
To apply a border to a downstream key, use the following procedure.
EDITOR
GPI
SET UP
SHIFT
AUXILIARY
BLACK
BACKGROUND
BLACK
FOREGROUND
BLACK
1
In the DSK section of the menu control section, press the BORDER
button, turning it on.
The downstream key border setting menu (DSK)appears.
DSK
1/1
PAGE
3-48
Chapter 3 Basic Operation
1 2 3
USER PGM SNAP SHOT
TITLE DSK EDGE
1 2
STATUS EDIT
LUM LUM LUM TRAIL
SHADOW
CRK CRK BORDER BEVELD
EDGE INITIAL EDIT LEARN
MASK MASK MASK SOFT
RECALL
CCR LIGHTING MATTES BORDER PATTERN PAGE F1 F2 F3 F4 F5 HOLD LOCATION
ADJ INPUT
EFFECT
TRANS RATE DSK PATTERN NUMBER
FTB
SET SET
CCR TITLE 1 TITLE 2 DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT N/R REV DIRECT DIRECT DSK PVW
SOURCE SOURCE FILL RECALL PATTERN
LAST X FADE
TO
7 8 9 BLACK
1 2 3 4 5 6 7 8 MEMORY INT TITLE INS
VIDEO
4 5 6 DEL
INT
1 2 3 4 5 6 7 8 MEMORY CUT
VIDEO P IN P
DSK
1 2 3
RST
DOWN UP ENTER
0
AUTO
1 2 3 4 5 6 7 8 INT
MEMORY TRANS
VIDEO
PATTERN/KEY PAD
TYPE
Double
F1
2
Press the F1(TYPE) button, to select the border type.
Wide: wide border
Narrow: narrow border
Drop: drop border
Double: double border (combination of drop and narrow borders)
If you selected drop border or double border, you can now specify the
border position with the F2 button.
DSK TYPE POS
T + R
1/1 Double
PAGE F1 F2
3
If in step 2 you selected drop border or double border, press the
F2(POS) button to specify the border position.
Each time you press the button it cycles to the next in the sequence
"T+L" (top and left)" t "T+R" (top and right)" t "B+R" (bottom
and right) t "B+L" (bottom and left).
To remove the border
In the DSK section of the menu control section, press the BORDER
button, turning it off.
Chapter 3 Basic Operation
3-49