Sony DFS-700 Service Manual page 34

Modifying the Boundary — Border, Soft Edge,
Beveled Edge, and Crop
You can apply a border to the boundary between the foreground image and
background image, or mask unwanted parts of the image.
There are four effects for modifying the boundary, as follows. You can use
all four simultaneously.
Border: apply a border to the image boundary.
Soft edge: blur the image boundary.
Beveled edge: apply a bevel to the image boundary.
Crop: adjust the image boundary position, to eliminate unwanted parts.
(For picture-in-picture and other effects in which a reduced image is
used, reduce noise on the periphery of the image.)
Note
Depending on the effect pattern, you may not be able to apply the above
effects. For details, see the section "Effect Pattern Variant Forms and
Decorations" (page A-22).
Procedure
EDITOR
GPI
SET UP
SHIFT
AUXILIARY
BLACK
BACKGROUND
BLACK
FOREGROUND
BLACK
To apply a border
Use the following procedure.
1
Press the BORDER button in the EDGE section, turning it on, and
display page 1 of the EDGE menu.
EDGE
1/2
PAGE
2
Turn the F1(Border) knob, to set the width of the border.
3-26
Chapter 3 Basic Operation
EDGE section
Effect control section
USER PGM SNAP SHOT
1 TITLE 2 DSK EDGE
STATUS EDIT
LUM LUM LUM TRAIL
SHADOW
CRK CRK BORDER BEVELD
EDGE INITIAL EDIT LEARN
MASK MASK MASK SOFT
RECALL
CCR LIGHTING MATTES BORDER PATTERN PAGE F1 F2 F3 F4 F5 LOCATION
HOLD
ADJ INPUT
EFFECT
TRANS RATE DSK PATTERN NUMBER
FTB SET SET
CCR TITLE 1 TITLE 2 DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT N/R REV DIRECT DIRECT DSK PVW
RECALL PATTERN
SOURCE SOURCE FILL
LAST X FADE
TO
1 2 3 4 5 6 7 8 7 8 9 INS BLACK
MEMORY INT TITLE
VIDEO
4 5 6 DEL
INT
1 2 3 4 5 6 7 8 MEMORY CUT
VIDEO
P IN P
DSK
1 2 3 RST
DOWN UP ENTER
0
INT AUTO
1 2 3 4 5 6 7 8 MEMORY
VIDEO TRANS
PATTERN/KEY PAD
Controls used in modifying the boundary
Border Soft BvlWid BVLTYP BvlInt
0-100 0-100 –100-100 01-20 0-100
F1 F2 F3 F4 F5
To blur the image boundary
Use the following procedure.
1
Press the SOFT button in the EDGE section, turning it on, and display
page 1 of the EDGE menu.
EDGE Border Soft BvlWid BVLTYP
1/2 0-100 0-100 –100-100 01-20
PAGE F1 F2 F3
2
Turn the F2(Soft) knob, to set the degree of boundary blurring.
To apply a beveled edge to the image boundary
Use the following procedure.
1
Press the BEVELD EDGE button in the EDGE section, turning it on,
and display page 1 of the EDGE menu.
EDGE Border Soft BvlWid BVLTYP
0-100 0-100 –100-100 01-20
1/2
PAGE F1 F2 F3
2
Turn knobs F3(BvlWid), F4(BVLTYP), and F5(BvlInt) to set the
width, type, and contrast of the beveled edge.
To remove unwanted portions of the image
Use the following procedure.
1
Press any one of the BORDER, SOFT, and BEVELD EDGE buttons,
turning it on, and display page 2 of the EDGE menu. (Press the PAGE
button to change the page.)
EDGE CROP Left Right Top
AUTO –400-400 –400-400 –300-300
2/2
PAGE F1 F2 F3
2
To adjust the image boundary manually, press the F1(CROP) button to
select "MANUAL".
3
Turn the F2(Left), F3(Right), F4(Top), F5(Bottom) knobs, to adjust the
four sides of the image boundary.
Note
If in step 2 you set F1(CROP) to "AUTO", the automatic adjustment for
the particular effect pattern is carried out. Selecting "OFF" disables the
cropping.
When effect parameters are already adjusted
When parameters of a border, soft edge, beveled edge, or crop effect are
already adjusted, simply pressing any one of the BORDER, SOFT, and
BEVELD EDGE buttons in the EDGE section to turn it on allows you to
apply the selected effects to the effect pattern.
Chapter 3 Basic Operation
BvlInt
0-100
F4 F5
BvlInt
0-100
F4 F5
Bottom
–300-300
F4 F5
3-27