Sony DFS-700 Service Manual page 30

Selecting an Effect
Example Effects
This section shows as examples the effect patterns ("direct patterns")
which you can access simply by pressing a button in the pattern/numeric
keypad. Note that the effect patterns shown below are the factory default
assignments, and you can change the patterns assigned to buttons 0 to 9
and P IN P/RST.
For details of how to change the assignments, see the section "Changing Direct
Pattern Assignments" (page 4-1).
7
Pattern number: 1
Effect type: wipe
Motion type: transition
The foreground image appears from the left, and wipes over the
background image to the right.
8
Pattern number: 9
Effect type: wipe
Motion type: transition
The foreground image appears from the upper left corner, and wipes over
the background image to the lower right.
9
Pattern number: 24
Effect type: wipe
Motion type: transition
The foreground image appears as a circle in the center of the image, and
this circle grows, wiping over the background image.
3-18
Chapter 3 Basic Operation
4
Pattern number: 700
Effect type: matrix wipe
Motion type: transition
The foreground image appears in the upper left corner, and fills the screen
in a series of vertical strips.
5
Pattern number: 1300
Effect type: slide
Motion type: transition
The foreground image appears from the right, and slides over the
background image to the left.
6
Pattern number: 1700
Effect type: 3D rotation
Motion type: transition
The foreground image appears as a door rotating toward the viewer to
close, and covers the background. When the door is completely closed, the
foreground fills the screen.
1
Pattern number: 1902
Effect type: flip
Motion type: transition
The image rotates about a vertical axis as though a panel with the
background on one side. When the panel reaches 90 degrees to the plane of
the screen, the foreground image appears on the other side, and completely
fills the screen when the transition ends.
3-19
Chapter 3 Basic Operation