Sony DFS-700 Service Manual page 32

Selecting an Effect
3D mapping effects
These effects use nonlinear image processing techniques. They include 3D
page turn, 3D beveled edge, and so on.
3D wave
Three-picture cube
Note
Using 3D mapping effects requires the optional BKDF-712 3D Video
Mapping Effects Board.
Using the three-picture cube effect also requires the optional BKDF-711
2nd Channel DME Board.
3-22
Chapter 3 Basic Operation
3D page turn 3D beveled edge
Multi-cube
3D cylinder
Selection in Direct Pattern Selection Mode
In the direct pattern selection mode, pressing any button (other than INS,
DEL, UP, DOWN, or ENTER) in the pattern/numeric keypad directly
selects an effect pattern.
For details of the effects assigned by factory default to the buttons in the pattern/
numeric keypad, see the previous section "Example Effects" (page 3-18).
Procedure
To select an effect pattern in the direct pattern selection mode, use the
following procedure.
Note
If the EDIT button in the user program section (see page 2-11) is lit, first
press it, turning it off.
1
EDITOR LUM
GPI CRK
SET UP MASK
SHIFT CCR
AUXILIARY
BLACK 1
BACKGROUND
BLACK 1
FOREGROUND
1
BLACK
1
Press the DIRECT PATTERN button, turning it on.
The unit is now in direct pattern selection mode.
2
In the pattern/numeric keypad, press the button assigned to the desired
effect pattern, turning it on.
This selects the effect assigned to the button, and the pattern number
appears in the PATTERN NUMBER display window.
USER PGM SNAP SHOT
TITLE DSK EDGE
2
STATUS EDIT
LUM LUM TRAIL
SHADOW
CRK BORDER BEVELD
EDGE INITIAL EDIT LEARN
MASK MASK SOFT
RECALL
LIGHTING MATTES BORDER PATTERN PAGE F1 F2 F3 F4 F5 HOLD LOCATION
ADJ INPUT
EFFECT
TRANS RATE DSK PATTERN NUMBER
FTB
SET SET
1
CCR TITLE 1 TITLE 2 DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT N/R REV DIRECT DIRECT DSK PVW
SOURCE SOURCE FILL RECALL PATTERN
LAST X FADE
TO
7 8 9 BLACK
2 3 4 5 6 7 8 MEMORY INT TITLE INS
2
VIDEO
4 5 6 DEL
INT
2 3 4 5 6 7 8 MEMORY CUT
VIDEO P IN P
DSK
1 2 3
RST
DOWN UP ENTER
0
AUTO
2 3 4 5 6 7 8 INT
MEMORY TRANS
VIDEO
PATTERN/KEY PAD
3-23
Chapter 3 Basic Operation