Auto Reset; Job Timeout; Fault Timeout; Mm / Inch - Fuji Xerox DocuPrint P255 d User Manual

• Auto Reset

Purpose:
To specify a time period before the printer restores the default setting for the current menu item and
resumes the ready-to-print state when an attempt to change the setting is left unfinished.
Values:
45sec*
1min
2min
3min
4min
* Factory default menu setting

• Fault Timeout

Purpose:
To specify a time period before the printer cancels a job that has halted abnormally. Any job will be
cancelled when it times out.
Values:
Off
On
* Factory default menu setting

• Job Timeout

Purpose:
To specify a time period that the printer waits to receive data from a computer. Any print job will be
cancelled when it times out.
Values:
Off
On
* Factory default menu setting

• mm / inch

Purpose:
To specify the measurement unit after the numeric value displayed on the operator panel.
Values:
Millimeters (mm)*
Inches (")
* Factory default menu setting
Disables the fault time-out feature.
By default, the printer cancels a job in 60 seconds after the job
60sec*
halts abnormally. You can change the setting within a range
3sec - 300sec
from 3 to 300 seconds.
Disables the job time-out feature.
By default, the printer waits to receive data from a computer
30sec*
for 30 seconds. You can change the setting within a range
5sec - 300sec
from 5 to 300 seconds.
Using the Operator Panel Menus 169